ATF ADVANCED TECHNICAL FABRICATION is a French company
founded 45 years ago,
specialized in the sector Fabrication de matériel médico-chirurgical et dentaire.
Based in MARIGNIER (74970),
this company of category PME
shows in 2024 a revenue of 11.2 M€.
Find below the complete financial statements, solvency ratios, working capital requirements and sector comparison.
Im Jahr 2024 erzielt ATF ADVANCED TECHNICAL FABRICATION einen Umsatz von 11.2 Mio€. Die Aktivität bleibt über den Zeitraum stabil (CAGR: -0.2%). Vs 2023: +1%. Nach Abzug des Verbrauchs (779 k€) beträgt die Bruttomarge 10.4 Mio€, d.h. eine Rate von 93%. Dieses Verhältnis misst die Fähigkeit, aus der Geschäftstätigkeit Wert zu schaffen. EBITDA (= Bruttomarge - Personalkosten - Steuern) erreicht 643 k€, was 5.7% des Umsatzes entspricht. Die operative Marge bleibt fragil und erfordert Kostenwachsamkeit. Das Nettoergebnis beträgt 431 k€, d.h. 3.8% des Umsatzes.
Umsatz (2024)
?
Umsatz
Definition
Gesamtbetrag der Verkäufe von Waren und Dienstleistungen des Unternehmens.
Formel
Warenverkäufe + Verkaufte Produktion
11 217 433 €
Bruttomarge (2024)
?
Bruttomarge
Definition
Differenz zwischen Umsatz und Wareneinsatz.
Formel
Umsatz - Wareneinsatz
10 438 343 €
EBITDA (2024)
?
EBITDA (Betriebsergebnis vor Abschreibungen)
Definition
Ressource générée par l'activité courante, avant amortissements et charges financières.
Formel
Wertschöpfung - Personalkosten - Steuern
Interpretation
Positiv = rentable Tätigkeit
643 256 €
EBIT (2024)
?
EBIT (Betriebsergebnis)
Definition
Betriebsergebnis, einschließlich Abschreibungen und Rückstellungen.
Formel
EBITDA - Abschreibungen und Rückstellungen + Auflösungen
-1 397 138 €
Nettoergebnis (2024)
?
Nettoergebnis
Definition
Bénéfice ou perte après toutes les charges, y compris impôts et éléments exceptionnels.
Le compte de résultat détaillé n'est pas disponible pour cette entreprise (liasse simplifiée ou données confidentielles).
Évolution graphique
Anzeigen :
Visualisierung erstellt mit numbers.finance Sources : INPI & BCE - Anpassungen : Ministère de l'Économie
Aktiva
Chargement des données...
Poste
Brutto
Abschr.
Netto
%
Entwicklung
Données de bilan actif non disponibles pour cette entreprise
Passiva
Chargement des données...
Poste
Jahr
%
Entwicklung
Données de bilan passif non disponibles pour cette entreprise
Solvenz- und Verschuldungskennzahlen
Die Verschuldungsquote (= Finanzschulden / Eigenkapital x 100) beträgt 20%. Dieses niedrige Niveau spiegelt eine solide Finanzstruktur wider. Die finanzielle Autonomie (= Eigenkapital / Bilanzsumme x 100) erreicht 73%. Diese hohe Autonomie bedeutet, dass das Unternehmen den Großteil seiner Vermögenswerte durch Eigenkapital finanziert. Die Schuldenrückzahlungskapazität zeigt, dass es 1.9 Jahre Cashflow braucht. Diese kurze Periode zeigt eine ausgezeichnete Schuldentragfähigkeit. Der Cashflow beträgt 12.3% des Umsatzes. Dieses hohe Niveau bietet eine starke Selbstfinanzierungskapazität.
Verschuldungsgrad (2024)
?
Verschuldungsgrad
Definition
Misst das Verhältnis von Schulden zu Eigenkapital.
Formel
(Finanzschulden / Eigenkapital) x 100
Interpretation
< 50% : Faible 50-100% : Moderat > 100% : Hoch
20.211%
Finanzielle Autonomie (2024)
?
Finanzielle Autonomie
Definition
Anteil des Eigenkapitals an der Gesamtfinanzierung.
Entwicklung der Solvenzkennzahlen ATF ADVANCED TECHNICAL FABRICATION
Visualisierung erstellt mit numbers.finance Sources : INPI & BCE - Anpassungen : Ministère de l'Économie
Kennzahl
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
Verschuldungsgrad
41.536
35.898
22.914
18.884
12.234
17.425
18.398
28.842
24.663
20.211
Finanzielle Autonomie
55.964
59.721
66.532
70.045
76.2
71.835
73.185
69.733
71.053
72.687
Rückzahlungsfähigkeit
2.559
2.065
0.516
1.283
0.3
1.488
1.909
2.107
2.422
1.867
Cashflow / Umsatz
16.636%
18.307%
24.072%
20.84%
25.291%
21.188%
15.629%
15.986%
14.641%
12.254%
Positionnement sectoriel
Verschuldungsgrad
20.212024
2022
2023
2024
Q1: 1.92
Méd: 18.86
Q3: 55.42
Average
Im Jahr 2024 liegt über dem Median der Branche das verschuldungsgrad von ATF ADVANCED TECHNICAL FA... (20.21). Dieses Verhältnis misst das Gewicht der Schulden im Verhältnis zum Eigenkapital. Eine Reduzierung könnte die finanzielle Stärke verbessern.
Finanzielle Autonomie
72.69%2024
2022
2023
2024
Q1: 24.8%
Méd: 50.27%
Q3: 69.09%
Ausgezeichnet
Im Jahr 2024 liegt in den oberen 25% der Branche das finanzielle autonomie von ATF ADVANCED TECHNICAL FA... (72.7%). Dieses Verhältnis stellt den Anteil des Eigenkapitals an der Gesamtfinanzierung dar. Hohe Autonomie spiegelt finanzielle Unabhängigkeit und Fähigkeit wider, Schocks zu absorbieren.
Rückzahlungsfähigkeit
1.87 ans2024
2022
2023
2024
Q1: 0.0 ans
Méd: 0.3 ans
Q3: 1.74 ans
Average
Im Jahr 2024 liegt über dem Median der Branche das rückzahlungsfähigkeit von ATF ADVANCED TECHNICAL FA... (1.9 ans). Dieses Verhältnis gibt die Anzahl der Jahre an, die zur Rückzahlung der Schulden mit dem Cashflow benötigt werden. Eine Reduzierung könnte die finanzielle Stärke verbessern.
Liquiditätskennzahlen
Die Liquiditätsquote beträgt 398.39. Das Unternehmen verfügt über 2€ liquide Mittel für jeden 1€ kurzfristiger Schulden. Der Zinsdeckungsgrad (= EBIT / Zinsaufwendungen) beträgt 29.5x. Das Betriebsergebnis deckt die Zinsaufwendungen sehr weitgehend.
Liquiditätsquote (2024)
?
Liquiditätsquote
Definition
Fähigkeit, kurzfristige Schulden mit dem Umlaufvermögen zu decken.
Formel
Umlaufvermögen / Kurzfristige Verbindlichkeiten
Interpretation
> 1.5 : Sehr gut 1-1.5 : Angemessen < 1 : Risque de liquidité
398.386
Zinsdeckung (2024)
?
Zinsdeckung
Definition
Fähigkeit, Zinsaufwendungen mit dem Betriebsergebnis zu decken.
Entwicklung der Liquiditätskennzahlen ATF ADVANCED TECHNICAL FABRICATION
Visualisation créée via abddaf.fr Sources : INPI & BCE - Retraitements : Ministère de l'économie
Kennzahl
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
Liquiditätsquote
269.815
287.669
201.306
329.126
279.388
388.36
473.473
454.072
559.985
398.386
Zinsdeckung
16.902
13.698
4.75
5.44
3.47
3.563
13.665
16.319
28.058
29.457
Positionnement sectoriel
Liquiditätsquote
398.392024
2022
2023
2024
Q1: 159.64
Méd: 253.69
Q3: 429.69
Gut
Im Jahr 2024 liegt über dem Median der Branche das liquiditätsquote von ATF ADVANCED TECHNICAL FA... (398.39). Dieses Verhältnis misst die Fähigkeit, kurzfristige Schulden mit Umlaufvermögen zu decken. Diese komfortable Position bietet eine nennenswerte Sicherheitsmarge.
Zinsdeckung
29.46x2024
2022
2023
2024
Q1: 0.0x
Méd: 0.67x
Q3: 4.96x
Ausgezeichnet
Im Jahr 2024 liegt in den oberen 25% der Branche das zinsdeckung von ATF ADVANCED TECHNICAL FA... (29.5x). Dieses Verhältnis gibt an, wie oft das Betriebsergebnis die Zinsaufwendungen deckt. Hohe Deckung bedeutet, dass Finanzaufwendungen die Rentabilität wenig belasten.
Umlaufvermögensbedarf und Zahlungsfristen
Der Betriebskapitalbedarf (WCR) misst die zeitliche Lücke. Durchschnittliche Kundenzahlungsfrist: 39 Tage. Lieferantenfrist: 78 Tage. Ausgezeichnete Situation: Lieferanten finanzieren 39 Tage des Betriebszyklus. Die Bestandsumschlagsdauer beträgt 316 Tage. Dieses hohe Niveau bindet Liquidität und schafft potenziell Obsoleszenzrisiko. Der WCR repräsentiert 324 Tage Umsatz. Im Zeitraum 2015-2024 stieg der WCR um +46%.
Operatives Working Capital (2024)
?
Operatives Working Capital
Definition
Besoin de financement généré par le cycle d'exploitation (stocks + créances - dettes fournisseurs).
(Lieferantenverbindlichkeiten / Einkäufe inkl. MwSt.) x 360
Interpretation
Je länger die Frist, desto besser für die Liquidität
78 j
Lagerumschlag (2024)
?
Lagerumschlag (Tage)
Definition
Durchschnittliche Lagerdauer für Waren oder Materialien.
Formel
(Vorräte / Einkaufskosten) x 360
Interpretation
Je niedriger das Verhältnis, desto schneller der Umschlag
316 j
Working Capital in Umsatztagen (2024)
?
Working Capital in Umsatztagen
Definition
Drückt den Betriebskapitalbedarf in Umsatztagen aus.
Formel
(BFR exploitation / CA) x 360
Interpretation
Je weniger Tage, desto besser das Working Capital Management
324 j
Entwicklung des Working Capital und der Zahlungsfristen ATF ADVANCED TECHNICAL FABRICATION
Visualisierung erstellt mit numbers.finance Sources : INPI & BCE - Anpassungen : Ministère de l'Économie
Kennzahl
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
BFR d'exploitation
6 897 780 €
6 175 054 €
5 824 364 €
6 512 250 €
6 479 258 €
6 522 521 €
8 577 667 €
10 333 713 €
9 968 595 €
10 082 902 €
Lagerumschlag (Tage)
257
242
249
301
288
368
353
391
365
316
Crédit clients (jours)
19
17
17
12
20
28
18
26
35
39
Crédit fournisseurs (jours)
92
93
98
91
74
94
81
48
59
78
Positionnement de ATF ADVANCED TECHNICAL FABRICATION dans son secteur
Vergleich mit der Branche Fabrication de matériel médico-chirurgical et dentaire
Bewertungsschätzung
Based on 57 transactions of similar company sales
(all years),
the value of ATF ADVANCED TECHNICAL FABRICATION is estimated at
1 842 788 €
(range 576 308€ - 3 625 611€).
With an EBITDA of 643 256€, the sector multiple of 2.5x is applied.
The price/revenue ratio is 0.23x
(conservative valuation).
This multiples method compares the actual sale price of similar companies to their financial indicators (Revenue, EBITDA, Net Income). It provides a market-based indicative estimate. Medium reliability: estimate to be confirmed with in-depth analysis.
Estimated enterprise value2024
57 tx
576k€1842k€3625k€
1 842 788 €Range: 576 308€ - 3 625 611€
NAF 5 all-time
Valuation detail by method
Ajustez les pondérations selon votre analyse
EBITDA Multiple50%
643 256 €×2.5x
Estimation1 633 459 €
321 034€ - 3 020 790€
Revenue Multiple30%
11 217 433 €×0.23x
Estimation2 544 118 €
1 182 381€ - 5 323 136€
Net Income Multiple20%
431 469 €×3.0x
Estimation1 314 117 €
305 384€ - 2 591 379€
How is this estimate calculated?
This estimate is based on the analysis of 57 actual transactions of similar company sales (same NAF code) registered with BODACC between 2016 and 2025.
EBITDA Multiple: Preferred method for profitable SMEs. EBITDA reflects the ability to generate cash.
Revenue Multiple: Used for growing companies or those with low profitability. Reflects commercial potential.
Net Income Multiple: Relevant for mature companies with stable results.
This estimate is provided for information purposes only. A precise valuation requires in-depth analysis (assets, liabilities, prospects, market...).
Similar companies (Fabrication de matériel médico-chirurgical et dentaire)
Compare ATF ADVANCED TECHNICAL FABRICATION with other companies in the same sector:
Frequently asked questions about ATF ADVANCED TECHNICAL FABRICATION
What is the revenue of ATF ADVANCED TECHNICAL FABRICATION ?
The revenue of ATF ADVANCED TECHNICAL FABRICATION in 2024 is 11.2 M€.
Is ATF ADVANCED TECHNICAL FABRICATION profitable?
Yes, ATF ADVANCED TECHNICAL FABRICATION generated a net profit of 431 k€ in 2024.
Where is the headquarters of ATF ADVANCED TECHNICAL FABRICATION ?
The headquarters of ATF ADVANCED TECHNICAL FABRICATION is located in MARIGNIER (74970), in the department Haute-Savoie.
Where to find the tax return of ATF ADVANCED TECHNICAL FABRICATION ?
The tax return of ATF ADVANCED TECHNICAL FABRICATION is available on this page. Click on a year in the 'Data by year' section to view the account details (assets, liabilities, income statement). Data comes from INPI (National Institute of Industrial Property).
In which sector does ATF ADVANCED TECHNICAL FABRICATION operate?
ATF ADVANCED TECHNICAL FABRICATION operates in the sector Fabrication de matériel médico-chirurgical et dentaire (NAF code 32.50A). See the 'Sector positioning' section above to compare the company with its competitors.
Item evolution
Drehen Sie Ihr Telefon ins Querformat, um das Diagramm anzuzeigen